|
|
Post by Rob Albritton on Nov 2, 2016 19:54:07 GMT -5
SP had only one E8 #6018. What you folks modelled are E9s. And don't forget that you need an E7B to go with it. Correct - I misstyped - E9 is what I should have said. And for the record, we did in fact make a SP Daylight E7 A-B-B locomotive set. It was AZL 2843 - produced in brass. |
|
|
|
Post by Commodore on Nov 2, 2016 21:17:32 GMT -5
Hey, Rob-
I didn't say that, Mark did...
|
|
|
|
Post by markm on Nov 2, 2016 23:21:51 GMT -5
Hey, Rob- I didn't say that, Mark did... That's ok...I'm mad at Rob for not doing 6018.  |
|
|
|
Post by fulingyu on Nov 3, 2016 8:33:05 GMT -5
SP had only one E8 #6018. What you folks modelled are E9s. And don't forget that you need an E7B to go with it. Correct - I misstyped - E9 is what I should have said.
And for the record, we did in fact make a SP Daylight E7 A-B-B locomotive set. It was AZL 2843 - produced in brass.How about releasing a SP Daylkight E7 A-B-B injection molded set to pull these heavyweights? |
|
|
|
Post by Rob Albritton on Nov 3, 2016 16:16:02 GMT -5
]How about releasing a SP Daylkight E7 A-B-B injection molded set to pull these heavyweights? R U fooling Me?  |
|
|
|
Post by smr on Nov 3, 2016 16:25:14 GMT -5
I'm going to run my daylight set behind my GS4. It should be an easier pull than the brass passenger cars that came with my #4449. This release was a great surprise! Hi John, If you have one of the sets (AZL #2702) this release is in my eyes the perfect addition to it (without the two sleepers, of course). May be you can do some pictures or a brief video? Best, Sven |
|
|
|
Post by smr on Nov 3, 2016 16:31:11 GMT -5
And for the record, we did in fact make a SP Daylight E7 A-B-B locomotive set. It was AZL 2843 - produced in brass. Quod erat demonstrandum:  ...and for the record, , AZL did make SP Daylight E8A locomotives, AZL 1831,............... (road # 6048, 6050, 6051)  Best, Sven |
|
|
|
Post by davestubbs on Nov 3, 2016 17:26:47 GMT -5
I have that set, and would be happy to post a video once mine arrive in the mail
|
|
|
|
Post by markm on Nov 3, 2016 17:29:25 GMT -5
Sorry Sven, but SP owned only one E8 #6018. The road numbers you mentioned were E9s: espee.railfan.net/spe-08.htmlSP used a lot of E7Bs. I'll bet a run of injection molded dummy E7Bs in the various SP colors would sell out quickly. Mark |
|
|
|
Post by shamoo737 on Nov 3, 2016 18:20:18 GMT -5
To me, all the E's and all the F's look the same.  |
|
|
|
Post by QcKraag on Nov 3, 2016 21:06:46 GMT -5
I can guarantee you that an fp9a looks nothing like an fl9 just my 2 cents |
|
|
|
Post by smr on Nov 4, 2016 7:33:29 GMT -5
Sorry Sven, but SP owned only one E8 #6018. The road numbers you mentioned were E9s: espee.railfan.net/spe-08.htmlSP used a lot of E7Bs. I'll bet a run of injection molded dummy E7Bs in the various SP colors would sell out quickly. Mark I know Mark, and I did not say that SP did it, but AZL: www.zscalemonster.com/azl/e8/e8.htm  Ok? Best, Sven My picture is the E7 from AZL |
|
|
|
Post by smr on Nov 4, 2016 19:40:10 GMT -5
I'm going to run my daylight set behind my GS4. It should be an easier pull than the brass passenger cars that came with my #4449. This release was a great surprise! Good call. The GS locomotives should pull this easily. I can help with two pictures of an AZL GS-3 by Karl Sinn;   I hope that some sets make it over to Europe as well. Best, Sven |
|
|
|
Post by smr on Nov 4, 2016 19:44:14 GMT -5
I have that set, and would be happy to post a video once mine arrive in the mail  That would be great, Dave, Please do so! Best, Sven  |
|
|
|
Post by fulingyu on Nov 4, 2016 20:27:22 GMT -5
Sorry, mistake
|
|
Ok?
