|
Post by casey on Oct 27, 2024 11:16:55 GMT -5
Hi guys struggling with Rokuhan switch back controller using 5 x 220mm Rokuhan straights first straight sensor A Third track power and Fith track Sensor B Problem loco not stopping loco being used shorty any help welcomed
|
|
|
Post by Curn on Oct 27, 2024 12:35:07 GMT -5
Rokuhan C006 uses photo sensors to detect the train so low ambient light levels may impact them. I would test that the sensors are working and that the controller is reversing current by just placing your hand over the sensor. Shorty locos tend to run fast and are short, so maybe they are flying by the sensor before it can trip. You can try slowing them down a bit to see if that helps.
|
|