|
|
Post by mgatdog on Jan 8, 2024 14:32:28 GMT -5
Just wondering how the antenna is attached to the PRR GP 7’s just got ? Glue ? Also and are they easy to remove ?
Thanks
|
|
|
|
Post by zscalehobo on Jan 8, 2024 14:57:35 GMT -5
Never tried removing one but I might try prying it loose first.
|
|
|
|
Post by mgatdog on Jan 8, 2024 15:23:31 GMT -5
Frank
That’s a lot of antenna to be prying on. Don’t want to damage the shell either.
|
|
|
|
Post by rvn2001 on Jan 8, 2024 15:33:33 GMT -5
Just clip it off with a flush cutter. That will leave plugs in the holes so that you don't have to fill them.
|
|
mry89
New Member
Posts: 4
|
Post by mry89 on Jan 8, 2024 15:34:08 GMT -5
|
|
mry89
New Member
Posts: 4
|
Post by mry89 on Jan 8, 2024 15:39:59 GMT -5
Just clip it off with a flush cutter. That will leave plugs in the holes so that you don't have to fill them. Oh boy . That’s going to be interesting. I guess better than 9 holes to fill on top. Thanks gentlemen. |
|
|
|
Post by Kez on Jan 8, 2024 16:30:07 GMT -5
If you want it out completely, then I recommend a TINY drop of acetone (nail polish remover) on the UNDERSIDE of the shell at each attachment location. Give it a moment for the acetone to break down the CA glue, and then it should pull out easily.
|
|
|
|
Post by bapakbob on Jan 9, 2024 2:22:05 GMT -5
Antenna ya say! i just thought they were handrails for the overflow commuters on the Main Line Attachments:
|
|
