|
|
Post by QcKraag on Jul 7, 2016 16:27:00 GMT -5
I am pretty new to Z scale and still have a few kinks to etch out but I am planning on making my own turnouts and was wondering what would be the optimal turnout size for freight and passenger cars?
|
|
|
|
Post by shamoo737 on Jul 7, 2016 16:56:00 GMT -5
If you have room, go with a #8. A #6 will work with most six axle locos.
|
|
|
|
Post by strummer on Jul 9, 2016 1:47:51 GMT -5
I agree...
Mark in Oregon
|
|
|
|
Post by domi on Jul 9, 2016 10:56:14 GMT -5
|
|
|
|
Post by QcKraag on Jul 20, 2016 8:03:45 GMT -5
Thanks all, I ordered a no 8 for now, will try a no 6 eventually, compared the printout turnouts to the micro train turnout which really seemed to be a 4.25 turnout and thought I would be fine with either 6 or 8 and since I have plent of room, decided to try 8 first... Because of the cost of the jig...
|
|
