|
Post by christoff on Jun 13, 2015 13:37:01 GMT -5
My new locomotives will be here in 2 days! There all azl units im curious on how everyone brakes in the new units thanks in advance
|
|
|
Post by shamoo737 on Jun 13, 2015 19:16:22 GMT -5
Run it on a oval without any turnouts for 30 minutes forwards and backwards. If it still runs bad, my experiences are they going to be bad runners. That's true for both AZL and MTL.
|
|
|
Post by markm on Jun 14, 2015 9:36:02 GMT -5
I also like to run a loco clockwise and counter-clockwise. The biggest issue with running a burn-in procedure, is waiting the half hour before you start playing with the engine.
Mark
|
|
|
Post by christoff on Jun 14, 2015 10:59:07 GMT -5
Should I run te locos together or should they all be run sepretly
|
|
|
Post by shamoo737 on Jun 14, 2015 16:02:37 GMT -5
Should I run te locos together or should they all be run sepretly They should be run seperately. You don't want anything to get in the way in case they stall.
|
|
|
Post by modelwarships on Jun 15, 2015 13:28:23 GMT -5
I do 15 forward and 15 reverse on an oval test track before I do anything to them.
|
|
|
Post by christoff on Jun 15, 2015 19:38:44 GMT -5
CN GP38-2 is broken in so to say I'm very pleased it ran like a dream I can't wait to see what it will pull. CN GP38-2 number 2 is on the rails right now hopefully it will do just as good then I can do the other 3 haha I'm going to be sitting here watching locos run all night
|
|
|
Post by christoff on Jun 15, 2015 22:06:05 GMT -5
So number 2 went off without a hitch very happy with the pair of CN locos now the CP rail gp38-2 ran about 2 laps of the oval before grinding to a halt lol being in Canada I thought if I save the shipping and the hassle from sending it over borders maybe I could learn in the process well I was right I pulled the shell off and undid the screws like a kid running through a candy store and all the sudden it fell into many pieces it took me a while but it's a fairly simple design and now that locos has been running like a top I have no idea what the issue was but hey I'm not going to complain and I'm proud of my first tear down or fall apart as I like to call them
|
|